Extension plunger for pushbutton with extended stroke, for compensation of the gap between pushbutton and release button of a thermal overload relay(e.g.)

متاح 24 ساعة علي مدار الأسبوع
قسم كهرباء الباور
قسم التحكم الآلي
قسم الإضاءة
قسم النيوماتيك
80.04جنيه السعر الأصلي هو: 80.04جنيه.66.70جنيهالسعر الحالي هو: 66.70جنيه.
Extension plunger for pushbutton with extended stroke, for compensation of the gap between pushbutton and release button of a thermal overload relay(e.g.)
برجاء تسجيل الدخول للاستفادة من الكاش باك من هذا المنتج. وفِّر
شحن سريع 24 ساعة لجميع أنحاء الجمهورية + وجود إسترجاع مرن
Extension plunger for pushbutton with extended stroke, for compensation of the gap between pushbutton and release button of a thermal overload relay(e.g.)
متاح على الطلب المؤجل
1.00جنيهFesto Push-In Fitting, Series: NPQH Series, 3 mm Nominal, G1/8 MNPT x 4 mm Tube, Straight, 9 x 3 mm Hex, 16.5 mm Length, -0.95 to 20 bars, 0 to 150 deg C, Brass, Nickel Plated, 13 mm H
إنتهى من المخزن
متاح على الطلب المؤجل
1.00جنيهXT7H 1600 Ekip Dip LSIG In=1600A 3p F F
في المخزون
Ex-device made of stainless steel, IP65. Empty enclosure prepared for installation of the ET 200iSP. Device group II Cat. 2 Zone 1 and 2 (gas). Size (WxHxD): 950x450x230, for max. 25 I/O modules. Cable glands: 2x M32 power supply, 4x M20 bus cables and 66x M16 (4-9 mm) for signals in 3 rows, plastic version. Ambient operating temperature -20 C…+70 C
متاح على الطلب المؤجل
1.00جنيهVigiPacT RH21M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 220/240VAC 50/60Hz. The current sensitivity is selectable with 2 thresholds 30 mA and 300 mA. The time delay is instantaneous 0.06s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.
في المخزون
متاح على الطلب المؤجل
1.00جنيهمتاح على الطلب المؤجل
1.00جنيهفي المخزون
في المخزون
في المخزون
متاح على الطلب المؤجل
1.00جنيهمتاح على الطلب المؤجل
1.00جنيهفي المخزون
متاح على الطلب المؤجل
1.00جنيهفي المخزون
في المخزون

ليس لديك حساب بعد؟
إنشاء حسابستيم الإستخدام طبقا ً للشروط والأحكام
المراجعات
مسح المرشحاتلا توجد مراجعات بعد.