Schneider | BCH2LH2033CA6C |servo motor BCH, Lexium 28, 100mm, 2000W, 4.28kg.cm², with oil seal, with key, straight connection

This product is part of the Lexium 28 range, an offer of servo motors from 0.05kW to 4.5kW. The servo motor features maximum mechanical speed of 5000RPM and keyed shaft end without holding brake. It is an equipped with a 20bit single-turn absolute encoder. It is a second generation servo motor with a rated supply voltage of 220V, a continuous stall current of 9.87A and a continuous power of 2000W. The shaft dimensions are 22mm (diameter) x 45mm (length). It is furnished with MIL connector for electrical connection. It is an IP50 and IP65 rated product. The length of this product is 198.5mm and the centering collar dimensions are 7mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 6.7kg. It is suitable for machine control solutions. This range is compatible with Lexium 28 servo drives. This product is compatible with LXM26D servo drive motor at 2kW 220V three phase. It supports 100mm Asian standard flange mount with a natural convection cooling system. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

                                                  

برجاء تسجيل الدخول للاستفادة من الكاش باك من هذا المنتج. وفِّر

شحن سريع خلال 24-48 ساعة لجميع أنحاء الجمهورية + وجود إسترجاع مرن

👌أضف منتجات بقيمة 9,999.00جنيه و أكثر وسوف تحصل على شحن مجاني لطلبك😍
محتاج كمية؟ اطلب عرض سعر خاص
76 شخص يشاهدون هذا المنتج الآن!
رمز المنتج: BCH2LH2033CA6C التصنيف:
الوصف

This product is part of the Lexium 28 range, an offer of servo motors from 0.05kW to 4.5kW. The servo motor features maximum mechanical speed of 5000RPM and keyed shaft end without holding brake. It is an equipped with a 20bit single-turn absolute encoder. It is a second generation servo motor with a rated supply voltage of 220V, a continuous stall current of 9.87A and a continuous power of 2000W. The shaft dimensions are 22mm (diameter) x 45mm (length). It is furnished with MIL connector for electrical connection. It is an IP50 and IP65 rated product. The length of this product is 198.5mm and the centering collar dimensions are 7mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 6.7kg. It is suitable for machine control solutions. This range is compatible with Lexium 28 servo drives. This product is compatible with LXM26D servo drive motor at 2kW 220V three phase. It supports 100mm Asian standard flange mount with a natural convection cooling system. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

الشحن والتوصيل
شحن سريع خلال 24-48 ساعة لجميع أنحاء الجمهورية -نحن دائماً جاهزون لمساعدتكتواصل معنا من خلال أي من قنوات الدعم التالية: مركز المساعدة epemall.com/contact-us، الدعم عبر البريد الإلكتروني sales@epemall.com ، الدعم عبر الهاتف 01282555680
0 تقييم
0
0
0
0
0

المراجعات

مسح المرشحات

لا توجد مراجعات بعد.

كن أول من يقيم “Schneider | BCH2LH2033CA6C |servo motor BCH, Lexium 28, 100mm, 2000W, 4.28kg.cm², with oil seal, with key, straight connection”

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5

يجب عليك تسجيل الدخول لتتمكن من إضافة الصور إلى رأيك.