Festo VABD-L1-10AB-S-M3 seal Suitable For Use With: VUVG, Specifications: 2.5 to 10 bar Pressure, -5 to 60 deg C, Material: NBR Finish: CRC2, ,

متاح 24 ساعة علي مدار الأسبوع
قسم كهرباء الباور
قسم التحكم الآلي
قسم الإضاءة
قسم النيوماتيك
1.00جنيه
0.01جنيه CashbackFesto VABD-L1-10AB-S-M3 seal Suitable For Use With: VUVG, Specifications: 2.5 to 10 bar Pressure, -5 to 60 deg C, Material: NBR Finish: CRC2, ,
برجاء تسجيل الدخول للاستفادة من الكاش باك من هذا المنتج. وفِّر
شحن سريع 24 ساعة لجميع أنحاء الجمهورية + وجود إسترجاع مرن
متاح للحجز (طلب مسبق)
Festo VABD-L1-10AB-S-M3 seal Suitable For Use With: VUVG, Specifications: 2.5 to 10 bar Pressure, -5 to 60 deg C, Material: NBR Finish: CRC2, ,
في المخزون
Selector switch, illuminable, 22 mm, round, metal, shiny, white, selector switch, short, 2 switch positions O-I, latching, actuating angle 90, 10:30h/13:30h, with holder, 1 NO+1 NC, screw terminal
إنتهى من المخزن
SIMATIC DP, TERMINAL BLOCK TB1/DC (ET 200B) FOR DIGITAL ELECTR. SUBMODULES WITH 3-WIRE SCREW TERMINALS, W=160MM
متاح على الطلب المؤجل
1.00جنيهTeSys LR97D electronic overcurrent relay, 7A/690V, to be supplied with 200-240V AC, for protection of motors with a rated current 1.2-6A. It provides 3 dials to adjust the protection, LOAD (1.2-7A) for the overcurrent level, O-TIME (0.3-10sec) for the acceptable duration of the overcurrent, D-TIME (0.5-30sec) for the starting duration. In addition, the device trips when the current is higher than 3 x LOAD during more than 0.5sec in steady state and if there is a missing phase during more than 3sec. Settings also include selectors for 1-phase/3-phase motors and manual/automatic reset, the device has a reset button, a test/stop button, 2 LED indicators (Run/Trip), 2 auxiliary contacts 1NO/NC for fault signaling. Settings can be locked by sealing the transparent cover. For direct attachment to the bottom terminals of a 3-phase contactor LC1D09-D38, with screw clamp terminals on bottom, the separate mounting from the contactor is possible using the terminal block LAD7B106 (to be ordered separately). Multi-standards certified (IEC, UL, CSA, CCC, EAC), compliant RoHs/Reach.
متاح على الطلب المؤجل
1.00جنيهXT2N 160 Ekip LS/I In=100A 4p F F
متاح على الطلب المؤجل
1.00جنيهPILZ | 570875 | PSEN sg Color Covers (Pushbutton)
متاح على الطلب المؤجل
1.00جنيهThis product is part of the Easy Harmony XA2 range, an offer of Ø 22mm plastic pushbuttons, switches and pilot lights. This selector switch comes with a standard handle. It has 2 operating positions and operates with a spring return mechanism with spring return right position. This selector switch provides a versatile interface for controlling machines. It has 1 NO contact with slow-break operation. This is a plastic switch with a metallic-look ring design bezel. It is an IP54 rated product and comes with CE, CCC and EAC certification conforming to GB 14048.1, IEC 60947-1, GB 14048.5 and IEC 60947-5-1 standards . It is easily installed into a standard 22mm diameter panel cut-outs and connected to control circuits with screw-clamp connections. It is impact resistant, dust resistant, water resistant and vibration resistant making it suitable for operation in harsh environments.

ليس لديك حساب بعد؟
إنشاء حسابستيم الإستخدام طبقا ً للشروط والأحكام
المراجعات
مسح المرشحاتلا توجد مراجعات بعد.