absolute encoder 6FX2001-5FN13 single-turn 16-bit with PROFINET operating voltage 10-30 V synchronous flange/ shaft 6 mm plug M12 radial FS15 maximum ambient temperature 85 °C

multiturn absolute encoder 6FX2001-5QD25 ST22 MT12 bit with DRIVE-CLiQ; clamp flange; shaft 10 mm

ABSOLUTE ENCODER MULTITURN 6FX2001-5QD25 36 BIT WITH DRIVE-CLIQ; CLAMP FLANGE; SHAFT 10MM

absolute encoder 6FX2001-5QN25 multi-turn 30-bit with PROFINET operating voltage 10-30 V clamp flange/ shaft 10 mm plug M12 radial FS15 maximum ambient temperature 85 °C

Signal cable pre-assembled type: 6FX2002-1DC00 (SINAMICS Drive CLiQ) Connector IP20/IP20, without 24 V Length (m)= 0 + 0 + 5 + 0

Signal cable pre-assembled type: 6FX2002-1DC00 (SINAMICS Drive CLiQ) Connector IP20/IP20, without 24 V Length (m)= 0 + 10 + 0 + 0

power connector gr. 3 type: 6FX2003-0LA20 male connector 6-pin, outer thread conductor cross section 10 … 50 mm2 contacts not included in the scope of delivery 6FX2003-8LS10, 5x 10+3x 1 … 2.5mm2 6FX2003-8LS16, 5x 16+3x 1 … 2.5mm2 6FX2003-8LS25, 5x 25+3x 1 … 2.5mm2 6FX2003-8LS35, 5x 35+3x 1 … 2.5mm2 6FX2003-8LS50, 5x 50+3x 1 . .. 2,5mm2 for cable diameter: 17 … 36

SIGNAL CONNECTOR 6FX2003-0SB14 FOR CONNECT. TO SINAMICS V90 14-POLES INSULATOR, MDR BAJONETT LOCK 14 X PIN CONTACT (0.05-0.2 MM2) D6 TO D8 MM CONTENT 30 PIECES

INCR. SIGNAL CONNECTOR 6FX2003-0SL11 FOR CONNECTION TO S-1FL6 HI 8-POLES INSULATOR, BAJONETT LOCK 8 X SOCKET CONTACT (0.2- 0.25 MM2) D6 TO D8 MM CONTENT 30 PIECES

SIGNAL CABLE PREASSEMBLED 6FX3002-2CT10 FOR INCR. ENCODER IN S-1FL6 HI 3X2X0.22+2X2X0.25 MOTION-CONNECT 300 UL/CSA DMAX=7.8MM LENGTH(M) = 7M

POWER CABLE PREASSEMBLED 6FX3002-5CL01 4X1,5, FOR MOTOR S-1FL6 HI 400V WITH V70/V90 FRAME AA AND A MOTION-CONNECT 300 UL/CSA DMAX=8,1MM LENGTH(M) = 7M

POWER CABLE PREASSEMBLED 6FX3002-5CL01 4X1,5, FOR MOTOR S-1FL6 HI 400V WITH V70/V90 FRAME AA AND A MOTION-CONNECT 300 UL/CSA DMAX=8,1MM LENGTH(M) = 7M

Signal cable pre-assembled type: 6FX5002-2DC10 (SINAMICS Drive CLiQ) connector IP20/IP67, with 24 V MOTION-CONNECT 500 Length (m)= 0 + 0 + 7 + 0

Signal cable pre-assembled type: 6FX5002-2DC10 (SINAMICS Drive CLiQ) connector IP20/IP67, with 24 V MOTION-CONNECT 500 Length (m)= 0 + 10 + 0 + 0

Signal cable pre-assembled type: 6FX5002-2DC10 (SINAMICS Drive CLiQ) connector IP20/IP67, with 24 V MOTION-CONNECT 500 Length (m)= 0 + 10 + 9 + 0

Due to redesign currently not possible to use in combination with 1FK7 motors with explosion protection signal cable, pre-assembled type: 6FX8002-2DC10 DRIVE-CLiQ with 24 V Connector RJ45 IP20 on module side and IP67 on motor side MOTION-CONNECT 800PLUS released only up to 75 m length Dmax=7.1 mm Length (m)= 0 + 30 + 0 + 0

Signal cable pre-assembled type: 6FX8002-2DC20 DRIVE-CLiQ with 24 V IP67/IP67, with 24 V Connector RJ45 IP67 on both sides MOTION-CONNECT 800PLUS released only up to 75 m length Dmax=7.1 mm Length (m)=50

Signal cable pre-assembled for absolute encoder EnDat integrated into the motor 3x (2×0.14) C+4x 0.14+2×0.5 +4x 0.22 C Connector full thread M23 MOTION-CONNECT 800PLUS trailable UL/CSA DESINA Dmax=9.8 mm Length (m)= TYPE: 6FX8002-2EQ10 LENGTH (M) = 0 + 10 + 5 + 0

Power cable pre-assembled type: 6FX8002-5CG01 4x 1.5 C, connector Full-thread, size 1 for SINAMICS S120 Power Module MOTION-CONNECT 800PLUS trailable UL/CSA DESINA Dmax=9.5 mm, Length (m)= 0 + 10 + 0 + 0 POWER CABLE PREASSEMBLED 4 X 1.5 C, CONNECTOR FULL THREAD SIZE 1 FOR SINAMICS S120 POWER MODULE MOTION-CONNECT 800PLUS TRAILING TYPE, UL/CSA DESINA DMAX = 9.5 MM

Power cable pre-assembled type: 6FX8002-5CR53 4x 16 C Screw connection M50/1PH813 for SINAMICS S120, with bare core ends at module side MOTION-CONNECT 800PLUS Dmax=22.3 mm Length (m)= 0 + 10 + 0 + 0

Single cable prefabricated 4G0.38+2×0.38+4×0.2 C SPEED-CONNECT M12 connector Cores with end sleeve Data cable with IX connector UL/CSA DESINA MOTION-CONNECT 800PLUS Dmax.=9.7 mm, length(m)= 0 + 0 + 4 + 0

OSM TP22 Optical Switch Module with two FOC ports 100 Mbit/s, two RJ45 Ports 10/100 Mbit/s and four digital inputs, redundant 24 V DC infeed, signaling contact integrated redundancy manager with network management.

SIMATIC NET, IE RADIO LINK MODULE (RLM), WIRELESS LAN ACCESS POINT IEEE 802.11B (11MBIT/S, 2.4GHZ) W. CONFIGURING SW ON CD; E-SW, SINGLE LICENSE FOR SEVERAL INSTALLATIONS CLASS B 1 LANG. (EN); EXECUT. UNDER MS WINDOWS (32BIT) 98, ME, NT4.0 WS,SERVER; 2000PRO,SERVER

Simatic NET, POWER SUPPLY FOR CP 1604

Communications processor CP 1616 PCI card (32 bit; 33/66M Hz; 3.3/5 V) with ASIC ERTEC 400 for connection to PROFINET IO with 4-port real-time switch (RJ45) via development kit DK-16XX PN IO; NCM PC

Communications processor CP 1616 PCI card (32 bit; 33/66M Hz; 3.3/5 V) with ASIC ERTEC 400 for connection to PROFINET IO with 4-port real-time switch (RJ45) via development kit DK-16XX PN IO; NCM PC

IE/PB LINK PN IO gateway between Ind. Ethernet and PROFIBUS with PROFINET IO Functionality S7 routing and dataset routing, 10/100 Mbit/s Fast Ethernet 9.6 Kbit/s up to 12 Mbit/s PROFIBUS

PROFIBUS OLM/G12-EEC V4.0 optical link module with 1 RS485 and 2 glass FOC Interfaces (4 BFOC sockets) for extended temperature range -20…+60 °C

COMMUNICATION Processor CP 5603 PCI-104 CARD (32 BIT; 3.3/5V) FOR CONNECT. TO PROFIBUS INCL. DP-BASE Software with NCM PC; DP-RAM Interface FOR DP-MASTER, INCL. PG- and FDL-PROTOCOL; SINGLE LICENSE FUER 1 INSTALL., RUNTIME-Software; Software and ELECTRONIC MANUAL ON CD-ROM, Class A, SUPPORT FOR OPERATING System SEE Simatic NET SW GERMAN/ENGLISH

SLOT SHEET METAL FOR CP 5603 IN Simatic S7-MEC FOR USE OF CP 5603 IN EXPANSION Module EM PCI-104 OF Simatic S7-MEC (MODULAR EMBEDDED Controller)

COMMUNICATION PROCESSOR CP 5611 PCI CARD (32 BIT) FOR CONNECTION OF A PG OR PC WITH PCI BUS TO PROFIBUS OR MPI