SIMATIC S7, memory cards for S7-1x 00 CPU, 3, 3V Flash, 2 GB

SIMATIC S7-400H, WORKING MEMORY FOR S7-CPU 417-H, 2 X 4 MBYTES

SIMATIC S7-1500H synchronization module for patch cable to 10 m

SIMATIC S7-1500H synchronization module for fiber optic cables up to 10 km

SIMATIC S7, BUS CONNECTOR FOR PROFIBUS DP, FLAT DESIGN ANTHRACITE, W/O PG CONNECTION SOCKET, FOR APPLICATIONS WITH MAX. 12 MBAUD

SIMATIC S7, HMI adapter V5 for connection of third-party HMI devices to S7-300/-400 With RS 232/RS 485 transformation

SIMATIC S7, PC ADAPTER V5.1 FOR CONNECTION OF S7-300/400, C7, M7; FOR CONVERSION OF RS232 TO RS485; W/O RS232 CABLE

SIMATIC S5, Backup battery Lithium SNR. 11111, size C, 3.6 V/5.2 AH for S5-110S-115U-135U-150U Caution! Hazardous goods

SIDOOR M4 L geared motor, pinion left, max. 400 kg door weight, Cable length 1.5 m, 30VDC, -20 °C to +50 °C

SIDOOR M4 R geared motor, Pinion, right max. 400kg door weight, Cable length 1.5 m, 30VDC, -20°C to +50°C

SIDOOR M3 R geared motor, Pinion, right max. 180kg door weight, Cable length 1.5 m, 30VDC, -20°C to +50°C

SIDOOR MDG5 R geared motor, shaft on the right with slot and fitted key A5x5 according to DIN 6885, max. 700 kg of mass to be moved, IP56, 2x M12 for separate motor connection cable, 30 V DC, -20 to +50 °C

SIDOOR MDG180 L DIN EN 45545-2 gear motor, pinion on the left door weight max. 180kg, Cable length 1.5m, DC 30 V, DIN EN 45545-2, -20C … + 50C

SIDOOR toothed belt Single toothed STS Super torque toothed belt Length 45 m, Width 12 mm

SIDOOR software kit consisting of SIDOOR user software with travel curve editor and oscilloscope function, Siemens HCS12 Firmware Loader, USB adapter, 1x USB connecting cable of the length 2 m, 1x connecting cable with connector and socket Bushing (female, 9-pole), D-sub, Connector (male, 9-pole), D-sub, length 2 m, 1x connecting cable with socket and socket, Sockets (female, 9-pole), Length 2 m

SIDOOR AT40 relay Control device for elevator doors, horizontal, up to 600 kg door weight, 36 V DC, 1*RS 485, 4*DI, 3*relay, 1*24 V DC out, -20 to +50 C

SINUMERIK 840C/840CE measuring circuit module analog 40 mm with 3 measuring circuits prepared for EXEs

SINUMERIK operator panel front 12.1″ TFT, width 19″ layout Trumpf with mechanical buttons

SINUMERIK 810D/840D PCU20: SPC 166 MHz; 32 MB DRAM 16 MB Flash; 24 V DC with current HMI software

SINUMERIK PCU 50 Pentium III/500 MHz/128 MB 24 V DC with Windows NT 4.0 (OS: SINUMERIK 840D BS003)