It is a single standard auxiliary contact that provides all the different indications remotely for ComPact NSX, ComPact NS, PowerPact Multistandard and EasyPact CVS circuit breakers. Remote status information are ON/OFF (OF), trip indication (SD) and fault-trip indication (SDE) for all circuit breakers types. The remote status information for trip indication due to an earth fault (SDV) is used for ComPact NSX and PowerPact Multistandard. The contacts are installed in the device in dedicated slots. This auxiliary contact is a common point changeover type contact with 1 normally open contact and 1 normally closed contact. The rated current is 6A and the minimum load is 100mA at 24 VDC for utilization categories are AC12/AC15/DC12/DC14. Screwless connections with spring terminals provide a fast and reliable connection. The section of connected cables is between 0.5 mm² (AWG20) and 1.5 mm² (AWG16).

carriage auxiliary switch NO/NC 6 A – 240 V – for Masterpact NT/NW NS630b..1600

cable interlocking adaptation fixture – for Masterpact NT fixed

cable interlocking adaptation fixture – for Masterpact NT drawout

It is a set of 2 cables for MasterPact NT/NW mechanical interlocking system. The authorized positions are one device OFF (closed) and the other ON (opened), or the two devices OFF (closed). It can be used for both fixed and drawout devices. The cable length is 2.5m.

This is a MX shunt trip release for Compact NS 630b to Compact NS 3200 devices. Its rated voltage is 100VDC to 130VDC or 100VAC to 130VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage Un rises above 70% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 3200 device can be equipped with 1 MX or 1 MN auxiliary.

This is a MX shunt trip release for Compact NS 630b to Compact NS 3200 devices. Its rated voltage is 200VDC to 250VDC or 200VAC to 250VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage Un rises above 70% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 3200 device can be equipped with 1 MX or 1 MN auxiliary.

This is a MX shunt trip release for Compact NS 630b to Compact NS 3200 devices. Its rated voltage is 380VAC to 480VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage Un rises above 70% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 3200 device can be equipped with 1 MX or 1 MN auxiliary.

This is a MN undervoltage release for Compact NS 630b to Compact NS 3200 devices. Its rated voltage is 100VDC to 130VDC or 100VDC to 130VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage drops to a value below 35% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 3200 device can be equipped with 1 MX or 1 MN auxiliary.

This is a MN undervoltage release for Compact NS 630b to Compact NS 3200 devices. Its rated voltage is 200VDC to 250VDC or 200VAC to 250VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage drops to a value below 35% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 3200 device can be equipped with 1 MX or 1 MN auxiliary.

This is a MN undervoltage release for Compact NS 630b to Compact NS 3200 devices. Its rated voltage is 380VAC to 480VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage drops to a value below 35% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 3200 device can be equipped with 1 MX or 1 MN auxiliary.

This time delay unit is an auxiliary that can be combined with an undervoltage release (MN). It must be associated with a 250VDC MN undervoltage release. It eliminates the risk of nuisance tripping due to transient voltage dips lasting from 200ms to 3s. Its power supply is 200-250VDC or 200-250VAC 50/60Hz. This time delay unit has 4 adjustable steps (0.5s – 1s – 1.5s – 3s). It is an external accessory and can be mounted in the switchboard.

non – adjustable time delay relay for voltage release MN – 200/250 V AC/DC

standard auxiliary contact, ComPact NS630b to NS1600, withdrawable, circuit breaker status SDE, 1 changeover contact

standard auxiliary contact, ComPact NS630b to NS1600, withdrawable, circuit breaker status SD, 1 changeover contact type

It is a single standard auxiliary contact for drawout Compact NS630b to 1600 devices. This auxiliary contact that provides OF remote information of the circuit breaker status. The OF contact (open/closed) indicates the position of the circuit breaker main contacts. There is one auxiliary contact model for OF, SD or SDE information, depending on where it is fitted in the device. This auxiliary is a common point changeover type contact with 1 normally open contact and 1 normally closed contact. The rated current is 6A and the minimum load is 100mA at 24 VDC. Utilization categories are AC12/AC13/DC12/DC14. Compact NS 630b to 1600 can be equipped with 3 OF auxiliary contacts. It complies with IEC 60947-5-1 standard.

Standard opening voltage release MX, MasterPact NT, ComPacT NS630b/NS1600, drawout, 100/130VDC, 100/130VAC

This is a MX shunt trip release for drawout Compact NS 630b to Compact NS 1600 devices. Its rated voltage is 200VDC to 250VDC or 200VAC to 250VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage Un rises above 70% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 1600 device can be equipped with 1 MX or 1 MN auxiliary.

Standard opening voltage release MX, MasterPact NT, ComPacT NS630b/NS1600, drawout, 380/480VAC

Standard opening undervoltage release MN, MasterPact NT, ComPacT NS630b/NS1600, drawout, 100/130VDC, 100/130VAC

voltage release MN – 200..250 V DC/AC 50/60 Hz

Standard opening undervoltage release MN, MasterPact NT, ComPacT NS630b/NS1600, drawout, 380/480VAC

It is a direct black rotary handle for Compact NS630b to 1600 devices. It is suitable for isolation and it is used for standard applications. This rotary handle is a front control accessory. The degrees of protection are IP40 and IK07. It may be locked in the OFF position by one to three padlocks, hasp diameter 5 to 8 mm (not supplied).

It is an extended black rotary handle for Compact NS630b to 1600 devices. It is suitable for isolation and it is used for standard applications. This rotary handle is a front control accessory. This extended version makes possible to operate devices installed at back of switchboards, from the switchboard front. The degrees of protection are IP55 and IK08. It may be locked in the OFF position by one to three padlocks, hasp diameter 5 to 8 mm (not supplied).

mechanical interlocking using connecting rods, ComPact N630b to NS1600, source changeover for 2 fixed devices

This is a complete assembly for cable interlocking of two Compact NS630b to 1600 electrically operated, in fixed version. For cable interlocking, the circuit breakers may be mounted one above the other or side-by-side. This assembly is made of 2 adaptation fixtures mounted on the right side of each device and a set of cables with no-slip adjustments. The interlocked devices may be 3 poles or 4 poles, and have different ratings and sizes.

rod interlocking for fixed – 630…1600 A

rod interlocking for drawout – for 2 Compact N630b…1600 A