PTC thermistor probe DA1-T – triple probe – 90°C

PTC thermistor probe DA1-T – triple probe – 110°C

PTC thermistor probe DA1-T – triple probe – 120°C

PTC thermistor probe DA1-T – triple probe – 130°C

PTC thermistor probe DA1-T – triple probe – 160°C

PTC thermistor probe DA1-T – triple probe – 170°C

MODBUS-RTU 8Pin Socket, Current ZCT

electronic overcurrent relay – 0.5..6 A – 220 V AC

electronic overcurrent relay – 0.5..6 A – 220 V AC

electronic overcurrent relay – 0.5..6 A – 220 V AC

electronic overcurrent relay – 0.5..6 A – 220 V AC

electronic overcurrent relay – 5-60A – 220 V AC

Electronic overcurrent relay, EOCR Digital, 0.5 to 6A, 220VAC

Electronic overcurrent relay, EOCR Digital, 0.5 to 6A, 220VAC

Electronic undercurrent relay, EOCR Digital, 0.5 to 6A, 24 to 240VAC/DC, Standard

Electronic undercurrent relay, EOCR Digital, 3.0 to 30A, 24 to 240VAC/DC, Standard

Electronic undercurrent relay, EOCR Digital, 5.0 to 60A, 24 to 240VAC/DC, Standard

TeSys Deca low signal interface module, for control of contactors LC.D09-D115 (3P). Electromechanical relay interface controlled by a 24V DC input signal. To be used with contactors with 24-250V AC coils (B7 to U7). To be mounted on a coil wiring adapter LAD4BB for contactors LC.D09-D38, LAD4BB3 for contactors LC.D40A-D80A, and directly on contactors LC.D80-D115. Green Premium compliant (RoHS/REACh).

TeSys Deca low signal interface module, for control of contactors LC.D09-D115 (3P). Static relay interface controlled by a 24V DC input signal. To be used with contactors with 24-250V AC coils (B7 to U7), for contactors LC.D80-D115 the use is limited to 100-250V AC coils (F7 to U7). To be mounted on a coil wiring adapter LAD4BB for contactors LC.D09-D38, LAD4BB3 for contactors LC.D40A-D80A, and directly on contactors LC.D80-D115. Green Premium compliant (RoHS/REACh).

Adapter terminal block, TeSys LRD, for separate mounting of LR2D1… LR3D1…

Adapter terminal block, TeSys LRD, for separate mounting of LR2D2… LR3D2…

TeSys LRD terminal block, for thermal overload relays LRD33**, LR3D33**, LR2D35**. To be used for a separate mounting of overload relay and contactor. It provides top connections by screw clamp terminals, clip-on fixing on 35 mm DIN-rail or fixing by screws. Green Premium compliant (RoHS/REACh).

TeSys D wiring adapter, for connection to the coil circuit of 3-pole contactors LC1D09-D38. It allows connection to the coil circuit from the top of the contactor, for adapting existing wiring to a new product. Also used for mounting of an electronic timer module LA4DT (to be ordered separately). Green Premium compliant (RoHS/REACh).

Schneider Electric lad703 m TeSys D Relay Thermal, Stop Device Remote Control, 220 – 230 V AC/DC

TeSys D thermal overload relays – Mechanical remote control

TeSys LRD terminal block for mounting of thermal overload relays LRD15, LR3D15. To be used for a separate mounting between overload relay and contactor. It provides top connections with screw clamp terminals, clip-on fixing on 35 mm DIN-rail or fixing by screws. Green Premium compliant (RoHS/REACh).

TeSys LRD terminal block for mounting of thermal overload relays LRD01-D35, LR3D01-D35 and electronic overcurrent relays LR97D. To be used for a separate mounting between overload relay and contactor. It provides top connections with screw clamp terminals, clip-on fixing on 35 mm DIN-rail or fixing by screws. Green Premium compliant (RoHS/REACh).

TeSys D thermal overload relays – pre-wiring kit of NC contact

TeSys D thermal overload relays – pre-wiring kit of NC contact

TeSys D terminal block, for mounting on LRD3xx, LR3D3xx thermal overload relays or as replacement part, for 3-pole contactors LC1D40A-D80A. It provides connection by EverLink BTR screw terminals. It ensures an IP20 protection on front. Green Premium compliant (RoHS/REACh).

TeSys LR97D electronic overcurrent relay, 1.5A/690V, to be supplied with 200-240V AC, for protection of motors with a rated current 0.3-1.3A. It provides 3 dials to adjust the protection, LOAD (0.3-1.5A) for the overcurrent level, O-TIME (0.3-10sec) for the acceptable duration of the overcurrent, D-TIME (0.5-30sec) for the starting duration. In addition, the device trips when the current is higher than 3 x LOAD during more than 0.5sec in steady state and if there is a missing phase during more than 3sec. The settings include selectors for 1-phase/3-phase motors and manual/automatic reset, and the device has a reset button, a test/stop button, 2 LED indicators (Run/Trip), 2 auxiliary contacts 1NO/NC for fault signalling. Settings can be locked by sealing the transparent cover. For direct attachement to the bottom terminals of a 3-pole contactor LC1D09-D38, with screw clamp terminals on bottom, the separate mounting from the contactor is possible using the terminal block LAD7B106 (to be ordered separately). Multi-standards certified (IEC, UL, CSA, CCC, EAC), compliant RoHs/Reach.

TeSys LR97D electronic overcurrent relay, 7A/690V, to be supplied with 200-240V AC, for protection of motors with a rated current 1.2-6A. It provides 3 dials to adjust the protection, LOAD (1.2-7A) for the overcurrent level, O-TIME (0.3-10sec) for the acceptable duration of the overcurrent, D-TIME (0.5-30sec) for the starting duration. In addition, the device trips when the current is higher than 3 x LOAD during more than 0.5sec in steady state and if there is a missing phase during more than 3sec. Settings also include selectors for 1-phase/3-phase motors and manual/automatic reset, the device has a reset button, a test/stop button, 2 LED indicators (Run/Trip), 2 auxiliary contacts 1NO/NC for fault signaling. Settings can be locked by sealing the transparent cover. For direct attachment to the bottom terminals of a 3-phase contactor LC1D09-D38, with screw clamp terminals on bottom, the separate mounting from the contactor is possible using the terminal block LAD7B106 (to be ordered separately). Multi-standards certified (IEC, UL, CSA, CCC, EAC), compliant RoHs/Reach.